EDT300/301

Product Information

Specialized test bench for all brand of common rail injectors
Automatic operation programme comprising of 4 units

Common rail injectors
Common rail piezo injectors

The modern design of the test bench enables the diesel systems specialist to efficiently check any
Common Rail injectors of any brand, including piezoelectric systems.

Thanks to the ongoing development of test records for all of the systems and the generation of new accessories, the EDT 300 / 301 is equipped to meet any market requirements.

EDT 300 – LDFT0003
EDT 301 – LDFT0004

EQUIPMENT
REF.

CRI BOSCH CR INJECTORS KIT
DELPHI CR INJECTORS KIT
CRI DENSO CR INJECTORS KIT
SIEMENS CR INJECTORS KIT
BOSCH CR PIEZO INJECTORS KIT

ACCESSORIES
REF.

LDFT1135 CODES PRINTER
LDFT1136 CARTRIDGE FOR CODES PRINTER
LDFT1137 CABLE – 4 PIN DENSO INJECTORS TEST
LDFT1138 CABLE – DFI 1.5 DELPHI INJECTORS TEST
LDFT1106 CODING – DELPHI C2I
LDFT1139 CODING – DELPHI C3IH
LDFT1105 CODING – DENSO
LDFT1104 CODING – BOSCH
LDFT0034 MACK RENAULT Ø 24 mm INJECTORS TEST KIT
LDFT0035 ACTROS Ø 26 mm INJECTORS TEST KIT
LDFT0036 MAN Ø 29 mm INJECTORS TEST KIT
LDFT0037 MAN Ø 29 mm H. 53.50 INJECTORS TEST KIT
LDFT0038 MACK 2 RENAULT 480 CV Ø 27.5 mm INJECTORS TEST KIT
LDFT0039 RENAULT PREMIUM 420 CV Ø 32 mm INJECTORS TEST KIT
LDFT0040 CUMMINS Ø 26 mm INJECTORS TEST KIT
LDFT0041 DENSO Ø 27 mm INJECTORS TEST KIT
LDFT0042 DENSO Ø 23.5 mm INJECTORS TEST KIT
LDFT0043 MAN Ø 26 mm INJECTORS TEST KIT
LDFT0044 FIAT TECTOR Ø 26 mm INJECTORS TEST KIT
LDFT0045 VOLVO-DEUTZ Ø 24.5 mm INJECTORS TEST KIT
LDFT0046 DENSO Ø 32 mm INJECTORS TEST KIT
LDFT0047 DENSO Ø 27.0-28.5 mm INJECTORS TEST KIT
LDFT0048 PERKINS Ø 19.5 mm INJECTORS TEST KIT
LDFT0049 SIEMENS FORD PIEZO Ø 27 mm POLV. 7 INJECTORS TEST KIT
LDFT0050 CR DEUTZ Ø 21 mm POLV.7 INJECTORS TEST KIT
LDFT0051 SCANIA/CUMMINS XPI-ISX INJECTORS TEST KIT
LDFT0052 DAEWOO Ø 26 mm INJECTORS TEST KIT
LDFT0053 BOSCH 4 PIN MERCEDES Ø 35 mm INJECTORS TEST KIT
LDFT1140 MERCEDES – MITSUBISHI FUSO INJECTORS TEST KIT

EDT 300 – LDFT0003
EDT 301 – LDFT0004

DRIVE SYSTEM

MOTOR 3 PHASE 400 VAC
(3 phases + 1 earth + 1 neutral)
POWER 4 kW – 5 Hp
FREQUENCY 50/60 Hz
SPEED CONTROL Digital and automatic selection using the software application on the test bench

MEASUREMENT SYSTEM

REPEATABILITY PRECISION 0.2% tolerance
INJECTION TIME MEASUREMENT Incorporated nozzle response time sensors
UNIT OF MEASUREMENT Electronic measurement of mass in mg/hit or mm3/hit
Resolution of 0.2 mg and precision of 0.2%
Temperature not sensitive and not affected
No mobile parts that will fail

FEED SYSTEM

OIL TANK 30 l
REFRIGERATION Refrigerator
SUPPLY TEMPERATURE 0 to 65 °C
RETURN TEMPERATURE 0 to 65 °C
MAXIMUM PRESSURE EDT 300: 1850 Bar
EDT 301: 2000 Bar
FILTRATION Capacity up to 3μ

COMPUTING SYSTEM

OPERATING SYSTEM Microsoft Windows 7 or above
SOFTWARE HAWK
SCREEN 15‘’ touchscreen
CONNECTIONS Ethernet and USB
PRINTER Samsung Laserjet

OPERATION SYSTEM

  • Minimum opening pressure detection
  • Minimum opening time detection
  • Nozzle and return leak tests
  • Measurement of injection amount at:
    • Pre-injection (VE)
    • Idle speed (LL)
    • Emissions (EM)
    • Full load (VL)
  • Detection of response time (sensors on board)
  • Detection of lack of spray (sensors on board)
  • Diagnosis of coil electrical conditions (graph on monitor)

DIMENSIONS

HEIGHT 1,560 mm
WIDTH 1,470 mm
DEPTH 970 mm
VOLUME 2.3 m3
WEIGHT 580 kg
BODY CONSTRUCTION Stainless steel
SAFETY DOOR Stainless steel and glass
Immediate stoppage of the motor if opened

INFORMATION SYSTEMS

MULTIBRAND All brands
TEST RECORDS Generation and storage of test records
Printing of reports with achievable reference values
SETTINGS Personalised data tables
UPDATING Permanent over the internet
SOURCES Original specifications of the automobile manufacturers

APPLICATIONS

  • CARS
  • LIGHT COMMERCIAL
  • HEAVY COMMERCIAL
  • AGRICULTURAL

Further information

EDT300/301 brochure